The Korten Switch Movement is a rugged operating mechanism designed specifically for use with the Korten Handset Hanger.

the number of leaf switches can vary from 1 to 4. All switches are form 'C' (break before we make) and are available with either silver palladium contacts (normal use) or gold contacts (low energy circuits).

The switch units are actuated by the hinged movement of the handset hanger through an arc of less than 10 degrees. Overall depth to the rear of the panel is 7/8" or 1 1/8" depending on the number of switch units. Each unit is supplied with (4) 8-32 X 5/16" machine screws – 2 pieces to attach the hanger to the movement to the panel and 2 pieces to attach the hanger to the movement.

MOVEMENT		CONTACTS
Material: Spring Steel, SAE 10 50		Silver – 60% Silver, 40% Palladium
Extension Spring: Type 302 Stainless		Rating: 1 Amp at 12V DC (125V AC)
Plating: Zinc & Bronzed		Resistive Gold: No. 1 gold
		Rating: 500ma at 12V DC (125V AC) Resistive note: Both types of contacts are welded crossbar
FORM 'C' SWITCHSTACK
Material: Spring Tempered Nickel Silver		BREAKDOWN VOLTAGE
Spacers: XXXP Paper Base Phenolic Laminate		500V 60Hz, when contact gap in excess
Tubing: Black Rigid PVC		of .051" is maintained.
Lifter: Nylon

SPRING STEEL MOVEMENT CONTACT MATERIAL SILVER GOLD NUMBER OF FORM 'C' SWITCHES 1 211 261 2 212 262 3 213 263 4 214 264